Best Table Lamp Bulb Holder With Switch of 2026

Last updated on 18/02/2026

Advertising disclosure

Advertising disclosure

Most Relevant

Electronics Home & Kitchen Computers Office Supplies Toys & Games Sports & Fitness

Most Relevant

ElekTek Special Safety Switch Lamp Bulb Holder B22 BC Bayonet Shade Ring, 10mm/M10 x1 Bottom Entry, Brass, Child Safe Switch Push Bar Locks Off to Cut Power if lamp Bulb not Inserted - Made in UK

ElekTek Special Safety Switch Lamp Bulb Holder B22 BC Bayonet Shade Ring, 10mm/M10 x1 Bottom Entry, Brass, Child Safe Switch Push Bar Locks Off to Cut Power if lamp Bulb not Inserted - Made in UK

Patented safety switch design.
Compatible with all B22 bulbs.
Solid brass construction.

Main Highlights

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design - MAKE SURE lamp holder is fully screwed together when assembled so that centre Safety Pin correctly depresses when a bulb is installed.
For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed
Dimensions: PLEASE CHECK YOUR THREAD SIZE BEFORE YOU ORDER - choice of 10mm (M10) or 1/2" (26 TPI) threaded bottom entry - as a guide, newer lamps will 'tend' to be 10mm (metric), old lamps will 'tend' to be 1/2" (imperial); Height: 63mm, Diameter: 32mm (Max.); Cable/Flex aperture/opening approx. 7mm
Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Product image 1

Product image 2

Product image 3

Product image 4

ElekTek Special Safety Switch Lamp Bulb Holder B22 BC Bayonet Shade Ring, 10mm/M10 x1 Bottom Entry, Brass, Child Safe Switch Push Bar Locks Off to Cut Power if lamp Bulb not Inserted - Made in UK

Patented safety switch design.
Compatible with all B22 bulbs.
Solid brass construction.

Main Highlights

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design - MAKE SURE lamp holder is fully screwed together when assembled so that centre Safety Pin correctly depresses when a bulb is installed.
For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed
Dimensions: PLEASE CHECK YOUR THREAD SIZE BEFORE YOU ORDER - choice of 10mm (M10) or 1/2" (26 TPI) threaded bottom entry - as a guide, newer lamps will 'tend' to be 10mm (metric), old lamps will 'tend' to be 1/2" (imperial); Height: 63mm, Diameter: 32mm (Max.); Cable/Flex aperture/opening approx. 7mm
Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Value for Money

ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 10mm/M10x1 Threaded Bottom Entry Antique Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power when no bulb fitted

ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 10mm/M10x1 Threaded Bottom Entry Antique Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power when no bulb fitted

Patented Safety Switch Design.
For All B22 Bulbs.
Solid Brass Construction Quality.

Main Highlights

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design
For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body
Dimensions: choice of 10mm or 1/2" threaded bottom entry - PLEASE CHECK YOUR THREAD SIZE BEFORE ORDERING; Height 63mm, Diameter 32mm (Max.); Cable/Flex aperture approx. 7mm
Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Product image 1

Product image 2

Product image 3

Product image 4

ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 10mm/M10x1 Threaded Bottom Entry Antique Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power when no bulb fitted

Patented Safety Switch Design.
For All B22 Bulbs.
Solid Brass Construction Quality.

Main Highlights

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design
For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body
Dimensions: choice of 10mm or 1/2" threaded bottom entry - PLEASE CHECK YOUR THREAD SIZE BEFORE ORDERING; Height 63mm, Diameter 32mm (Max.); Cable/Flex aperture approx. 7mm
Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Oiieco B22 Standard Switch Light Lamp Holder, Switched Lamp Holder 10MM Thread Entry, 2 Pcs B22 BC Bayonet Cap Lamp Holder for Ceiling Lamp Chandelier

Oiieco B22 Standard Switch Light Lamp Holder, Switched Lamp Holder 10MM Thread Entry, 2 Pcs B22 BC Bayonet Cap Lamp Holder for Ceiling Lamp Chandelier

One-touch control for convenience.
Easy installation with screw-in design.
High-quality, heat-resistant materials.

Main Highlights

One-Touch Control: Built-in ON/OFF switch on both sides lets you power your bulb instantly—no wall switch needed. Screw-in adapter means installation is as simple as twisting in the bulb.
Easy to install: B22 switched lamp holder, size 42*83MM, diameter of the wire inlet is 10MM. The wiring base and lamp holder can be installed by simply twisting them together, easy to disassemble.
High Quality Materials: B22 bayonet cap lamp holder is made of high quality material heat-resistant up to 120° for superior insulation and fire safety. Recommended max 60 W bulb to prevent overheating.
Universal Compatibility: Accepts any standard B22 bayonet bulb—LED, CFL or halogen—ideal for pendants, ceiling lights, table lamps, wall sconces and DIY projects.
Versatile Placement: B22 bayonet lamp holder is suitable for pendant lamps, ceiling lamps, wall lamps, ceiling lamps, table lamps. Commonly used in DIY tabletops, temporary building lights, living rooms, bedrooms, workshops, patios, corridors, balconies, attics, sheds, etc.

Product image 1

Product image 2

Product image 3

Product image 4

Oiieco B22 Standard Switch Light Lamp Holder, Switched Lamp Holder 10MM Thread Entry, 2 Pcs B22 BC Bayonet Cap Lamp Holder for Ceiling Lamp Chandelier

One-touch control for convenience.
Easy installation with screw-in design.
High-quality, heat-resistant materials.

Main Highlights

One-Touch Control: Built-in ON/OFF switch on both sides lets you power your bulb instantly—no wall switch needed. Screw-in adapter means installation is as simple as twisting in the bulb.
Easy to install: B22 switched lamp holder, size 42*83MM, diameter of the wire inlet is 10MM. The wiring base and lamp holder can be installed by simply twisting them together, easy to disassemble.
High Quality Materials: B22 bayonet cap lamp holder is made of high quality material heat-resistant up to 120° for superior insulation and fire safety. Recommended max 60 W bulb to prevent overheating.
Universal Compatibility: Accepts any standard B22 bayonet bulb—LED, CFL or halogen—ideal for pendants, ceiling lights, table lamps, wall sconces and DIY projects.
Versatile Placement: B22 bayonet lamp holder is suitable for pendant lamps, ceiling lamps, wall lamps, ceiling lamps, table lamps. Commonly used in DIY tabletops, temporary building lights, living rooms, bedrooms, workshops, patios, corridors, balconies, attics, sheds, etc.

K M Electronics® Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 1/2" Screw Thread

K M Electronics® Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 1/2" Screw Thread

K M Electronics

Durable brass construction.
Integrated shade ring.
Easy installation process.

Main Highlights

BRASS SWITCHED LAMP LIGHT BULB HOLDER
1/2" SCREW THREAD
WITH SHADE RING AND EARTH TERMINAL

Product image 1

K M Electronics

K M Electronics® Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 1/2" Screw Thread

Durable brass construction.
Integrated shade ring.
Easy installation process.

Main Highlights

BRASS SWITCHED LAMP LIGHT BULB HOLDER
1/2" SCREW THREAD
WITH SHADE RING AND EARTH TERMINAL

K M Electronics® Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 10MM Screw Thread

K M Electronics® Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 10MM Screw Thread

K M Electronics

Elegant brass design.
Secure screw thread.
Includes shade ring.

Main Highlights

BRASS SWITCHED LAMP LIGHT BULB HOLDER
10MM SCREW THREAD
WITH SHADE RING AND EARTH TERMINAL

Product image 1

K M Electronics

K M Electronics® Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 10MM Screw Thread

Elegant brass design.
Secure screw thread.
Includes shade ring.

Main Highlights

BRASS SWITCHED LAMP LIGHT BULB HOLDER
10MM SCREW THREAD
WITH SHADE RING AND EARTH TERMINAL

Suerisome 2 Pack B22 Standard Switch Light Lamp Holder Socket Bayonet Cap Fitting Switch Lamp Bulb Holder for Pendant Lamp Ceiling (White)

Suerisome 2 Pack B22 Standard Switch Light Lamp Holder Socket Bayonet Cap Fitting Switch Lamp Bulb Holder for Pendant Lamp Ceiling (White)

Built-in ON/OFF switch.
Super flexible extension kit.
Perfect for DIY projects.

Main Highlights

Perfect Package: 2 Pcs standard switch light lamp holders. It is a perfect replacement for a standard centre light pendant light fitting.
ON/OFF Cord Switch: The lamp holder is built in an on/off switch, you can be pushed in the button from one side or the other to turn the lamp on/off.
Advantage: Ideal extension light kit for your place, as flexible and super length, ideal lamp kit for DIY lampshades.
Please Note: Please cut off the power before installation. The switch will not operate without a bulb fitted, please make sure both halves of the lamp holder are screwed together properly.
Wide Use: B22 BC standard lamp holder with switch, perfect for the DIY desk, floor lamp to create a one-of-a-kind fixture for your home.

Product image 1

Product image 2

Product image 3

Product image 4

Suerisome 2 Pack B22 Standard Switch Light Lamp Holder Socket Bayonet Cap Fitting Switch Lamp Bulb Holder for Pendant Lamp Ceiling (White)

Built-in ON/OFF switch.
Super flexible extension kit.
Perfect for DIY projects.

Main Highlights

Perfect Package: 2 Pcs standard switch light lamp holders. It is a perfect replacement for a standard centre light pendant light fitting.
ON/OFF Cord Switch: The lamp holder is built in an on/off switch, you can be pushed in the button from one side or the other to turn the lamp on/off.
Advantage: Ideal extension light kit for your place, as flexible and super length, ideal lamp kit for DIY lampshades.
Please Note: Please cut off the power before installation. The switch will not operate without a bulb fitted, please make sure both halves of the lamp holder are screwed together properly.
Wide Use: B22 BC standard lamp holder with switch, perfect for the DIY desk, floor lamp to create a one-of-a-kind fixture for your home.

K M Electronics® Antique Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 1/2" Screw Thread

K M Electronics® Antique Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 1/2" Screw Thread

K M Electronics

Elegant antique brass design.
Convenient switch functionality included.
Durable screw thread build.

Main Highlights

ANTIQUE BRASS SWITCHED LAMP LIGHT BULB HOLDER
1/2" SCREW THREAD

Product image 1

K M Electronics

K M Electronics® Antique Brass Switched LAMP Light Bulb Holder BC Bayonet Cap 1/2" Screw Thread

Elegant antique brass design.
Convenient switch functionality included.
Durable screw thread build.

Main Highlights

ANTIQUE BRASS SWITCHED LAMP LIGHT BULB HOLDER
1/2" SCREW THREAD

ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 1/2” 26TPI Threaded Bottom Entry Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power if no bulb fitted

ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 1/2” 26TPI Threaded Bottom Entry Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power if no bulb fitted

Patented Safety Switch Design. Made in UK. Solid brass construction.

Main Highlights

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design
For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body
Dimensions: choice of 10mm or 1/2" threaded bottom entry - PLEASE CHECK YOUR THREAD SIZE BEFORE ORDERING; Height 63mm, Diameter 32mm (Max.); Cable/Flex aperture approx. 7mm
Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

Product image 1

Product image 2

Product image 3

Product image 4

ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 1/2” 26TPI Threaded Bottom Entry Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power if no bulb fitted

Patented Safety Switch Design. Made in UK. Solid brass construction.

Main Highlights

IMPORTANT: Switch will ONLY work when a bulb is fitted - Patented Safety Switch Push-Bar Design
For all types of B22 (22mm) Bayonet Cap Bulb: Incandescent, LED and Halogen
Made in UK: Solid Brass construction with Solid Brass Shade Ring. ALWAYS REMEMBER: Metal fittings MUST be earthed - when re-assembling after wiring, please ensure Earth Strap on the switch insert sits outside of the lamp holder body as originally supplied - do not squeeze inside the lamp holder body
Dimensions: choice of 10mm or 1/2" threaded bottom entry - PLEASE CHECK YOUR THREAD SIZE BEFORE ORDERING; Height 63mm, Diameter 32mm (Max.); Cable/Flex aperture approx. 7mm
Suitable for lighting circuits only - T2 temperature rating (220°C). Fully approved to BS 7895:1997

DIYEAH Black Pull Cord Light Socket E26 E27 Lamp Holder for Table Floor Lamps with Heat Resistant Bulb Base and Switch for DIY Lighting Repair

DIYEAH Black Pull Cord Light Socket E26 E27 Lamp Holder for Table Floor Lamps with Heat Resistant Bulb Base and Switch for DIY Lighting Repair

Durable and long-lasting construction.
Wide range of application uses.
Stylish design enhances your decor.

Main Highlights

Lamp Socket Compatibility: This black pull-wire switch is compatible with E26 and E27 lamp bases, making it a versatile lamp holder suitable for lamp repair kits, DIY pendant projects, and various lamp parts for making lamps
Heat Resistant and Safe Material: Constructed from heat resistant components, this lamp socket base supports safe and stable operation under extended use, reducing risks during lamp rewiring or replacement in indoor lighting setups
Compact Size and Lightweight Design: Measuring approximately 2.75 x 2.17 x 2.17 inches and weighing 70 grams, this pull-wire lamp holder is easy to install and replace, offering convenience for use in table lamps, corridor lamps, and balcony lamps
Wide Application Scenarios: Suitable for various indoor lighting needs including workshops, garages, basements, and shops, this black light switch supports multiple lamp types and enhances lamp repair kits and lamp accessories collections
Easy Installation and Replacement: Designed for simple and practical use, this lamp socket adapter enables quick replacement of broken or aging lamp sockets, making it a useful component for lamp rewire kits and DIY lighting projects

Product image 1

Product image 2

Product image 3

Product image 4

DIYEAH Black Pull Cord Light Socket E26 E27 Lamp Holder for Table Floor Lamps with Heat Resistant Bulb Base and Switch for DIY Lighting Repair

Durable and long-lasting construction.
Wide range of application uses.
Stylish design enhances your decor.

Main Highlights

Lamp Socket Compatibility: This black pull-wire switch is compatible with E26 and E27 lamp bases, making it a versatile lamp holder suitable for lamp repair kits, DIY pendant projects, and various lamp parts for making lamps
Heat Resistant and Safe Material: Constructed from heat resistant components, this lamp socket base supports safe and stable operation under extended use, reducing risks during lamp rewiring or replacement in indoor lighting setups
Compact Size and Lightweight Design: Measuring approximately 2.75 x 2.17 x 2.17 inches and weighing 70 grams, this pull-wire lamp holder is easy to install and replace, offering convenience for use in table lamps, corridor lamps, and balcony lamps
Wide Application Scenarios: Suitable for various indoor lighting needs including workshops, garages, basements, and shops, this black light switch supports multiple lamp types and enhances lamp repair kits and lamp accessories collections
Easy Installation and Replacement: Designed for simple and practical use, this lamp socket adapter enables quick replacement of broken or aging lamp sockets, making it a useful component for lamp rewire kits and DIY lighting projects

TWDRTDD B22 Bayonet Lamp Holder, BC,Bayonet Cap B22 Light Bulb Socket in Traditional Style with Shade Ring,10mm Threaded Bottom Entry (White,Pack of 2)

TWDRTDD B22 Bayonet Lamp Holder, BC,Bayonet Cap B22 Light Bulb Socket in Traditional Style with Shade Ring,10mm Threaded Bottom Entry (White,Pack of 2)

Easy to install, user-friendly.
Perfect for DIY projects.
Ideal for lamp rewiring.

Main Highlights

B22 black switch light socket bayonet cap fitting with Screw terminals
Easy to install,Simply fit your B22 base bulb to the lamp holder, then plug straight into your electrical socket and switch on using the switch
Bayonet socket that used with diy floor lamp or table lamp kits.
Bulb Holder B22 White Period Shape Lamp Pendant with lamp shade ring(Shade hole diameter required is between 26mm - 30mm,32mm at widest part)
It is a good way to rewire a table lamp,it also can be used to rewire an existing floor or Pendant lamp

Product image 1

Product image 2

Product image 3

Product image 4

TWDRTDD B22 Bayonet Lamp Holder, BC,Bayonet Cap B22 Light Bulb Socket in Traditional Style with Shade Ring,10mm Threaded Bottom Entry (White,Pack of 2)

Easy to install, user-friendly.
Perfect for DIY projects.
Ideal for lamp rewiring.

Main Highlights

B22 black switch light socket bayonet cap fitting with Screw terminals
Easy to install,Simply fit your B22 base bulb to the lamp holder, then plug straight into your electrical socket and switch on using the switch
Bayonet socket that used with diy floor lamp or table lamp kits.
Bulb Holder B22 White Period Shape Lamp Pendant with lamp shade ring(Shade hole diameter required is between 26mm - 30mm,32mm at widest part)
It is a good way to rewire a table lamp,it also can be used to rewire an existing floor or Pendant lamp

We scanned 1546 products

We reviewed these offers relevant to the Table Lamp Bulb Holder With Switch within online retailers such as Amazon, eBay and other local retailers, ensuring we covered all major brands and models. The products we selected come from trusted brands like ElekTek, Oiieco, K M Electronics, Suerisome, DIYEAH, TWDRTDD, all of which have a reputation for consistently delivering high-quality products that users love and innovative approaches for function & design.

For the best Table Lamp Bulb Holder With Switch in the market, we considered we took a deep dive into 7731 online reviews , focusing on elements like user satisfaction, performance in real-world conditions, and long-term reliability. Our ranking also evaluates each review’s relevancy, authenticity, up-to-dateness and depth so that the comparison is more sound.

We concluded that:

The clear winner of our analysis is ElekTek Special Safety Switch Lamp Bulb Holder B22 BC Bayonet Shade Ring, 10mm/M10 x1 Bottom Entry, Brass, Child Safe Switch Push Bar Locks Off to Cut Power if lamp Bulb not Inserted - Made in UK. We love many things about this product by ElekTek. What sets it apart from the competition is Patented safety switch design, Compatible with all B22 bulbs, Solid brass construction.
The best value product for most shoppers and where user satisfaction is continuously the highest is ElekTek Safety Switch Lamp Bulb Holder B22 BC Bayonet Cap & Shade Ring 10mm/M10x1 Threaded Bottom Entry Antique Brass Made in UK - Child Safe Switch Push Bar locks OFF & cuts power when no bulb fitted by ElekTek based on online reviews by bloggers, experts and online shoppers.
The biggest bargain at the moment for Table Lamp Bulb Holder With Switch and the best cost-to-value ratio is DIYEAH Black Pull Cord Light Socket E26 E27 Lamp Holder for Table Floor Lamps with Heat Resistant Bulb Base and Switch for DIY Lighting Repairat DIYEAH with a 27% discount.
Our list of the best Table Lamp Bulb Holder With Switch is updated regularly to reflect new releases and changes in product availability, so be sure to check back often for the latest rankings and discounts.